Smidzināšanas mašīnas izplatīto problēmu piemēri

Izmantojot mūsu iepriekšējo izpratni un padziļinātu izpratni paršāvienu spridzināšanas mašīna, there will still be some novices who do not fully understand the šāvienu spridzināšanas mašīna. At the same time, it is also popularized based on what we have not mentioned before. The following are some examples of our problems and polishing The technical requirements for shot blasting of the šāvienu spridzināšanas mašīna, etc., I hope you will learn something and strengthen your own practical deficiencies.
1. Skatoties uzšāvienu spridzināšanas mašīnano profesionālā viedokļa, kāda veida mašīna tā ir? Kā izvēlēties lietuves ražošanas un pārstrādes rūpnīcu?

The šāvienu spridzināšanas mašīna itself is a surface treatment equipment, dedicated to solve the problem of imperfect surface of metal objects, and can remove the rust layer, rust spots, oxidation, painting, renovation, etc. on the surface of metal objects. For the foundry industry, performance, stability and quality should be considered when choosing a šāvienu spridzināšanas mašīna. Secondly, considering the price, because there are more šāvienu spridzināšanas mašīnas in the market, you can choose to shop around. Only then can there be price comparisons.

2. Kādas ir tehniskās prasības šāvienu spridzināšanai? Kādi ir galvenie aspekti?

Viens punkts ir problēmašāvienu spridzināšanas mašīna itself. On the basis of shot blasting technology, the šāvienu spridzināšanas mašīna must be stable enough, and what kind of šāvienu spridzināšanas mašīna is used for example: steel shot, iron shot, aluminum shot , And what is the size of the pellets, and then what is the ejection speed when we shot blasting. The professional name is called ejection flow. Different shot blasting intensities have different throwing effects, and the efficiency will be corresponding. Get the same change.

3. What should I do if the šāvienu spridzināšanas mašīna misses the shot? How to solve it?
Jašāvienu spridzināšanas mašīna is in use, it is likely to be caused by the shape of the workpiece, but this is not an absolute factor. Usually, there will be more probability at the exit of the šāvienu spridzināšanas mašīna. According to this point, we will cause Pay attention, and deal with the missing blasting material at any time during the working time, so as not to form a pile, so as not to affect the normal shot blasting progress.
The above three points are reference for common problems of šāvienu spridzināšanas mašīnas, which are very useful for production and processing manufacturers. According to strict production, the shot blasting effect will not be bad, so we must also think from a comprehensive perspective in order to achieve ourselves The expected effect.